CuteCAD is an innovative
software, designed to speed up the prototyping process and shorten the time-to-market
of your products.
Click on the links below to see some of the most interesting features of CuteCAD. |
|
Parametric
gaskets
With CuteCad you can create many complex
gasket
shapes just by entering their construction parameters. |
Circular Flange Gasket |
 |
|
Outer diameter: the outer diameter of the gasket
Inner diameter: the inner diameter of the gasket
Holes number: the number of bolt holes
Holes diameter: the diameter of the bolt holes
Bolt diameter offset: by default, the bolt holes are centred
in the middle between the outer and the inner diameters. Change this value to move
the holes towards the outer contour (positive values) or the inner contour (negative
values).
Angle offset: by default the first bolt hole is placed
at 0°, change this value to rotate it counterclockwise
|
 Click to Enlarge
|
|
|
Rectangular Flange Gasket |
 |
|
External
width: the outer width of the flange
External height: the outer height of the flange
Primitive width: the width of the rectangle of the bolt
hole centers
Primitive height: the height of the rectangle of the bolt
hole centers
Inner width: the inner width of the flange
Inner height: the inner height of the flange
Hole diameter: the bolt hole diameter
Inner radius: the radius of the fillets around the bolt
holes |
|
Click to Enlarge
|
|
|
3-way Heat Exchanger Gasket |
 |
|
Vertical
Rib: the width of the vertical rib (between the two small holes)
Horizontal Rib: the width of the horizontal rib between
the big hole and the two small ones.
The other parameters are the same as those of the Circular Flange (see above). |
|
Click to Enlarge
|
|
|
|
|
|